Validate Evaluator

Calibrate an LLM judge against human judgment.

Overview

1. Split human-labeled data into train (10-20%), dev (40-45%), test (40-45%)
2. Run judge on dev set and measure TPR/TNR
3. Iterate on the judge until TPR and TNR > 90% on dev set
4. Run once on held-out test set for final TPR/TNR
5. Apply bias correction formula to production data

Prerequisites

• A built LLM judge prompt (from write-judge-prompt)
• Human-labeled data: ~100 traces with binary Pass/Fail labels per failure mode
• Aim for ~50 Pass and ~50 Fail (balanced, even if real distribution is skewed)
• Labels must come from a domain expert, not outsourced annotators
• Candidate few-shot examples from your labeled data

Core Instructions

Step 1: Create Data Splits

Split human-labeled data into three disjoint sets:

Target: 30-50 examples of each class (Pass and Fail) across dev and test combined. Use balanced splits even if real-world prevalence is skewed — you need enough Fail examples to measure TNR reliably.

from sklearn.model_selection import train_test_split

# First split: separate test set
train_dev, test = train_test_split(
    labeled_data, test_size=0.4, stratify=labeled_data['label'], random_state=42
)
# Second split: separate training examples from dev set
train, dev = train_test_split(
    train_dev, test_size=0.75, stratify=train_dev['label'], random_state=42
)
# Result: ~15% train, ~45% dev, ~40% test

Step 2: Run Evaluator on Dev Set

Run the judge on every example in the dev set. Compare predictions to human labels.

Step 3: Measure TPR and TNR

TPR (True Positive Rate): When a human says Pass, how often does the judge also say Pass?

TPR = (judge says Pass AND human says Pass) / (human says Pass)

TNR (True Negative Rate): When a human says Fail, how often does the judge also say Fail?

TNR = (judge says Fail AND human says Fail) / (human says Fail)

from sklearn.metrics import confusion_matrix

tn, fp, fn, tp = confusion_matrix(human_labels, evaluator_labels,
                                   labels=['Fail', 'Pass']).ravel()
tpr = tp / (tp + fn)
tnr = tn / (tn + fp)

Use TPR/TNR, not Precision/Recall or raw accuracy. These two metrics directly map to the bias correction formula. Use Cohen's Kappa only for measuring agreement between two human annotators, not for judge-vs-ground-truth.

Step 4: Inspect Disagreements

Examine every case where the judge disagrees with human labels:

For each disagreement, determine whether to:

• Clarify wording in the judge prompt
• Swap or add few-shot examples from the training set
• Add explicit rules for the edge case
• Split the criterion into more specific sub-checks

Step 5: Iterate

Refine the judge prompt and re-run on the dev set. Repeat until TPR and TNR stabilize.

Stopping criteria:

• Target: TPR > 90% AND TNR > 90%
• Minimum acceptable: TPR > 80% AND TNR > 80%

If alignment stalls:

Step 6: Final Measurement on Test Set

Run the judge exactly once on the held-out test set. Record final TPR and TNR.

Do not iterate after seeing test set results. Go back to step 4 with new dev data if needed.

Step 7 (Optional): Estimate True Success Rate (Rogan-Gladen Correction)

Raw judge scores on unlabeled production data are biased. If you need an accurate aggregate pass rate, correct for known judge errors:

theta_hat = (p_obs + TNR - 1) / (TPR + TNR - 1)

Where:

• p_obs = fraction of unlabeled traces the judge scored as Pass
• TPR, TNR = from test set measurement
• theta_hat = corrected estimate of true success rate

Clip to [0, 1]. Invalid when TPR + TNR - 1 is near 0 (judge is no better than random).

Example:

• Judge TPR = 0.92, TNR = 0.88
• 500 production traces: 400 scored Pass -> p_obs = 0.80
• theta_hat = (0.80 + 0.88 - 1) / (0.92 + 0.88 - 1) = 0.68 / 0.80 = 0.85
• True success rate is ~85%, not the raw 80%

Step 8: Confidence Interval

Compute a bootstrap confidence interval. A point estimate alone is not enough.

import numpy as np

def bootstrap_ci(human_labels, eval_labels, p_obs, n_bootstrap=2000):
    """Bootstrap 95% CI for corrected success rate."""
    n = len(human_labels)
    estimates = []
    for _ in range(n_bootstrap):
        idx = np.random.choice(n, size=n, replace=True)
        h = np.array(human_labels)[idx]
        e = np.array(eval_labels)[idx]

        tp = ((h == 'Pass') & (e == 'Pass')).sum()
        fn = ((h == 'Pass') & (e == 'Fail')).sum()
        tn = ((h == 'Fail') & (e == 'Fail')).sum()
        fp = ((h == 'Fail') & (e == 'Pass')).sum()

        tpr_b = tp / (tp + fn) if (tp + fn) > 0 else 0
        tnr_b = tn / (tn + fp) if (tn + fp) > 0 else 0
        denom = tpr_b + tnr_b - 1

        if abs(denom) < 1e-6:
            continue
        theta = (p_obs + tnr_b - 1) / denom
        estimates.append(np.clip(theta, 0, 1))

    return np.percentile(estimates, 2.5), np.percentile(estimates, 97.5)

lower, upper = bootstrap_ci(test_human, test_eval, p_obs=0.80)
print(f"95% CI: [{lower:.2f}, {upper:.2f}]")

Or use judgy (pip install judgy):

from judgy import estimate_success_rate

# judgy expects 0/1 integer labels (1 = Pass, 0 = Fail)
test_labels = [1 if l == 'Pass' else 0 for l in test_human_labels]
test_preds = [1 if l == 'Pass' else 0 for l in test_eval_labels]
unlabeled_preds = [1 if l == 'Pass' else 0 for l in prod_eval_labels]

theta_hat, lower, upper = estimate_success_rate(
    test_labels, test_preds, unlabeled_preds
)
print(f"Corrected rate: {theta_hat:.2f}")
print(f"95% CI: [{lower:.2f}, {upper:.2f}]")

Practical Guidance

• Pin exact model versions for LLM judges (a dated snapshot id like <model>-<YYYY-MM-DD>, not a floating alias). Providers update models without notice, causing silent drift.
• Re-validate after changing the judge prompt, switching models, or when production confidence intervals widen unexpectedly.
• Use ~100 labeled examples (50 Pass, 50 Fail). Below 60, confidence intervals become wide.
• One trusted domain expert is the most efficient labeling path. If not feasible, have two annotators label 20-50 traces independently and resolve disagreements before proceeding.
• Improving TPR narrows the confidence interval more than improving TNR. The correction divides by (TPR + TNR - 1), so a low TPR shrinks the denominator and amplifies estimation errors into wide CIs.

Anti-Patterns

• Assuming judges "just work" without validation. A judge may consistently miss failures or flag passing traces.
• Using raw accuracy or percent agreement. Use TPR and TNR. With class imbalance, raw accuracy is misleading.
• Dev/test examples as few-shot examples. This is data leakage.
• Reporting dev set performance as final accuracy. Dev numbers are optimistic. The test set gives the unbiased estimate.
• Raw judge scores without bias correction. If you report an aggregate pass rate, apply the Rogan-Gladen formula (Step 7).
• Point estimates without confidence intervals. A corrected rate of 85% could easily be 78-92% with small test sets. Report the range so stakeholders know how much to trust the number.