<!-- AUTO-GENERATED from SKILL.md.tmpl — do not edit directly --> <!-- Regenerate: bun run gen:skill-docs -->

Telemetry (run last)

After workflow completion, log telemetry with ONE command. OUTCOME is success/error/abort/unknown; SESSION_ID and TEL_START are the values the preamble's skill-start output echoed. It also drains the artifacts-sync queue (the former skill-end sync step — do not run gstack-brain-sync separately).

PLAN MODE EXCEPTION — ALWAYS RUN: This writes telemetry to $GSTACK_STATE_ROOT/analytics/, matching preamble analytics writes.

~/.claude/skills/gstack/bin/gstack-skill-end --skill "setup-gbrain" --outcome OUTCOME \
  --session-id "SESSION_ID" --tel-start "TEL_START" --used-browse USED_BROWSE \
  --error-message "ERROR_MESSAGE" --failed-step "FAILED_STEP" 2>/dev/null || true

Replace OUTCOME and USED_BROWSE (yes/no) before running; substitute SESSION_ID/TEL_START from the skill-start echoes. ERROR_MESSAGE/FAILED_STEP are "" unless outcome is error. If the command is missing (stale install), skip telemetry — it never blocks the workflow.

/setup-gbrain — Coding-Agent Onboarding for gbrain

You are setting up gbrain (https://github.com/garrytan/gbrain), a persistent knowledge base, on the user's machine so that this coding agent (typically Claude Code) can call it as both a CLI and an MCP tool.

Scope honesty: This skill's MCP registration step (5a) uses claude mcp add and targets Claude Code specifically. Other local hosts (Cursor, Codex CLI, etc.) will still get the gbrain CLI on PATH — they can register gbrain serve in their own MCP config manually after setup.

Audience: local machines (macOS, Linux, Windows). openclaw/hermes agents typically run in cloud docker containers with their own gbrain; "sharing" a brain between them and local Claude Code is only possible through shared Postgres (Supabase).

User-invocable

When the user types /setup-gbrain, run this skill. Invocation modes:

• /setup-gbrain — full flow (default)
• /setup-gbrain --repo — only flip the per-remote policy for the current repo
• /setup-gbrain --switch — only migrate the engine (PGLite ↔ Supabase)
• /setup-gbrain --resume-provision <ref> — re-enter a previously interrupted Supabase auto-provision at the polling step
• /setup-gbrain --cleanup-orphans — list + delete in-flight Supabase projects

Parse the invocation args yourself — these are prose hints to the skill, not implemented as a dispatcher binary.

Section index — Read each section when its situation applies

This skill is a decision-tree skeleton. The steps below point to on-demand sections. Read a section in full before doing its step; do not work from memory.

Step 1: Detect current state

~/.claude/skills/gstack/bin/gstack-gbrain-detect

Capture the JSON output. It contains: gbrain_on_path, gbrain_version, gbrain_config_exists, gbrain_engine, gbrain_doctor_ok, gbrain_mcp_mode, gstack_brain_sync_mode, gstack_brain_git, gstack_artifacts_remote, and the gbrain_local_status field (one of: ok, no-cli, missing-config, broken-config, broken-db, engine-locked, timeout, db-unreachable, thin-client). Treat timeout like ok (slow-but-healthy engine) — it never triggers Step 1.5 remediation. Treat db-unreachable the same way: a network error (offline sandbox, VPN down) reached the configured database, the config is unchanged and must not be moved aside; print gbrain_local_status_detail and continue. Treat thin-client like ok too: the machine is a thin client of a remote-HTTP MCP brain, no local engine by design — brain-aware blocks render, and the detect JSON carries gbrain_thin_client: {probed: false} (config verified; remote reachability is checked at use time, where gbrain calls degrade gracefully).

Skip downstream steps that are already done. Report the detected state in one line so the user knows what you found:

"Detected: gbrain v0.18.2 on PATH, engine=postgres, doctor=ok, sync=artifacts-only. Nothing to install; jumping to the policy check."

Branch on the --repo, --switch, --resume-provision, --cleanup-orphans invocation flags here and skip to the matching step.

Step 1.5: Broken-local-engine remediation

Read gbrain_local_status from the Step 1 detect output. **If it's broken-db or broken-config AND no shortcut flag was passed**, the user has a non-working local engine — run the remediation below BEFORE Step 2.

For gbrain_local_status values of no-cli or missing-config, do NOT fire Step 1.5 — fall through to Step 2 (where no-cli triggers Step 3 install and missing-config triggers Step 4 init). Do not read the remediation section in that case.

STOP. Before running the Step 1.5 broken-engine remediation — Step 1's detect returned gbrain_local_status of broken-db or broken-config and no shortcut flag was passed, Read ~/.claude/skills/gstack/setup-gbrain/sections/engine-remediation.md and execute it in full. Do not work from memory — that section is the source of truth for this step.

Step 1.7: Code-intelligence provider choice (Step 0 of indexing)

You are INSIDE /setup-gbrain: the user asked for gbrain by name, so the provider question is already answered. NEVER ask it here, and never let this step delay or derail the actual setup. Record the choice best-effort, then continue immediately with Step 2:

[ -f ~/.claude/skills/gstack/bin/gstack-code-intelligence ] \
  && bun --no-env-file --config=/dev/null ~/.claude/skills/gstack/bin/gstack-code-intelligence select gbrain 2>/dev/null \
  || true

The offer ceremony below applies ONLY when this skill is reached from another entry point where no provider was named (a routing skill exploring indexing options). Even then:

• "offer": false with reason bin-absent → the installed gstack predates the code-intelligence CLI. Skip this step entirely and continue with the skill — the user asked for gbrain, so set up gbrain. Never block setup on a missing optional gate.

• "offer": false with reason small-repo → grep is already fast here; say so in one line and continue with this skill only if the user asked for gbrain by name.
• "offer": false with reason provider-selected or declined → the machine-wide question was already answered; apply it silently and continue.
• "offer": true → present the returned options ONCE via AskUserQuestion: GBrain (recommended — semantic memory + code, sends repo content to YOUR gbrain DB, per-repo consent), Sourcebot (self-hosted whole-repo search, local when on localhost), Graphify (local tree-sitter graph, nothing leaves the machine, user installs it), or No indexing. Record the choice: gstack-code-intelligence select <provider|none> — none persists the decline so NO skill ever asks again, on any repo (re-enable: gstack-code-intelligence select <provider>). Local-compute and remote-send providers are separate consents — never bundle them.
• Per-repo send consent (GBrain/Sourcebot) is recorded with gstack-code-intelligence consent <repo> yes|no and is ALWAYS vetoed by a deny tier in gstack-gbrain-repo-policy — the trust store is the single authority for whether code leaves a repo.

If the user picked GBrain (or asked for this skill directly), continue below. If they picked Sourcebot/Graphify, run gstack-code-intelligence index <repo> and stop — the rest of this skill is gbrain-specific.

Step 2: Pick a path (AskUserQuestion)

Only fire this if Step 1 shows no existing working config AND no shortcut flag was passed. Special case: if gbrain_mcp_mode=remote-http in the detect output, an HTTP MCP is already registered — skip directly to Step 5a verification (re-test the registration) and Step 6 onward, treating this run as idempotent. Don't ask Step 2 again.

The question title: "Where should your brain live?"

Options (present based on detected state):

• 1 — Supabase, I already have a connection string. Cloud-agent users whose openclaw/hermes provisioned one already. Paste the Session Pooler URL from the Supabase dashboard (Settings → Database → Connection Pooler → Session). Trust-surface caveat to include in the prompt: "Pasting this URL gives your local Claude Code full read/write access to every page your cloud agent can see. If that's not the trust level you want, pick PGLite local instead and accept the brains are disjoint."
• 2a — Supabase, auto-provision a new project. You'll need a Supabase Personal Access Token (~90 seconds). Best choice for a shared team brain.
• 2b — Supabase, create manually. Walk through supabase.com signup yourself; paste the URL back when ready.
• 3 — PGLite local. Zero accounts, ~30 seconds. Isolated brain on this machine only. Best for try-first.
• 4 — Remote gbrain MCP. Someone else (or another machine of yours) is already running gbrain serve with HTTP transport. You paste the MCP URL
• a bearer token; this skill registers it as your MCP. No local brain DB, no local install needed. Recommended when the brain is shared across machines or run by a teammate.
• Switch (only if Step 1 detected an existing engine): "You already have a <engine> brain. Migrate it to the other engine?" → runs gbrain migrate --to <other> wrapped in timeout 180s.

Do NOT silently pick; fire the AskUserQuestion.

Step 3: Install gbrain CLI (if missing)

SKIP entirely on Path 4 (Remote MCP). Path 4 doesn't need a local gbrain binary — all calls go through MCP to the remote server. Jump to Step 4 (the Path 4 subsection).

For Paths 1, 2a, 2b, 3, switch — only if gbrain_on_path=false:

~/.claude/skills/gstack/bin/gstack-gbrain-install

The installer reuses an existing checkout first (probes ~/git/gbrain, ~/gbrain), then validates PATH shadowing (post-link gbrain --version must match install-dir package.json). On a PATH-shadow failure the installer exits 3 with a clear remediation menu; surface the full output to the user and STOP. Do not continue the skill — the environment is broken until the user fixes PATH.

Step 4: Initialize the brain

Path-specific. The init procedure for the path picked in Step 2 — Paths 1, 2a, 2b, 3, 4 (4a-4e), and the Switch migration flow — lives in the brain-init section. Run ONLY the sub-section for the picked path.

STOP. Before initializing the brain in Step 4 — run ONLY the procedure for the path picked in Step 2 (Paths 1/2a/2b/3/4 or Switch; also holds the PAT scope disclosure that --cleanup-orphans re-uses), Read ~/.claude/skills/gstack/setup-gbrain/sections/brain-init.md and execute it in full. Do not work from memory — that section is the source of truth for this step.

Step 5: Verify gbrain doctor

SKIP entirely on Path 4 (Remote MCP). The brain host runs its own doctor; we don't have local DB access to introspect. Step 4c's verify round-trip already proved the server is reachable, authed, and on a compatible MCP version.

For Paths 1, 2a, 2b, 3, switch:

doctor=$(gbrain doctor --json)
status=$(echo "$doctor" | jq -r .status)

If status is ok or warnings, proceed. Anything else → surface the full doctor output and STOP.

Step 5a: Register gbrain as Claude Code MCP

Only if which claude resolves. Ask: "Give Claude Code a typed tool surface for gbrain? (recommended yes)"

The registration form depends on the path picked in Step 2:

Path 4 (Remote MCP — HTTP transport with bearer)

Tear down any prior registration (could be local-stdio from an old setup, or stale remote-http with a rotated token), then register with HTTP + bearer at user scope:

claude mcp remove gbrain -s user 2>/dev/null || true
claude mcp remove gbrain 2>/dev/null || true
claude mcp add --scope user --transport http gbrain "$MCP_URL" \
  --header "Authorization: Bearer $GBRAIN_MCP_TOKEN"
unset GBRAIN_MCP_TOKEN  # zero from process env after registration
claude mcp list | grep gbrain  # verify: should show "✓ Connected"

Token-storage note: claude mcp add --header "Authorization: Bearer ..." puts the bearer on argv during process startup, briefly visible to ps for ~10ms. The token's resting state is ~/.claude.json (mode 0600 — Claude Code's own credential surface for every MCP server). This trade-off is documented in setup-gbrain/memory.md. If a future Claude Code release adds a stdin or env-var input form for headers, switch to that.

Paths 1, 2a, 2b, 3 (Local stdio)

Register at user scope with an absolute path to the gbrain binary. User scope makes the MCP available in every Claude Code session on this machine, not just the current workspace. Absolute path avoids PATH resolution issues when Claude Code spawns gbrain serve as a subprocess.

On Windows (Git Bash/MSYS) the gbrain.exe binstub starts bun in a new console, so every Claude Code session would open a visible terminal for the MCP. Register bun.exe with gbrain's entry instead, which attaches to Claude Code's hidden console. Without them, register gbrain.exe by its full name, because Claude Code does not add .exe to a stored path.

GBRAIN_BIN=$(command -v gbrain)
[ -z "$GBRAIN_BIN" ] && GBRAIN_BIN="$HOME/.bun/bin/gbrain"
claude mcp remove gbrain -s user 2>/dev/null || true
claude mcp remove gbrain 2>/dev/null || true
case "$(uname -s)" in
  MINGW*|MSYS*|CYGWIN*)
    BUN_ROOT="${BUN_INSTALL:-$HOME/.bun}"
    GBRAIN_ENTRY="$BUN_ROOT/install/global/node_modules/gbrain/src/cli.ts"
    if [ -f "$BUN_ROOT/bin/bun.exe" ] && [ -f "$GBRAIN_ENTRY" ]; then
      claude mcp add --scope user gbrain -- "$BUN_ROOT/bin/bun.exe" "$GBRAIN_ENTRY" serve
    else
      claude mcp add --scope user gbrain -- "$BUN_ROOT/bin/gbrain.exe" serve
    fi
    ;;
  *)
    claude mcp add --scope user gbrain -- "$GBRAIN_BIN" serve
    ;;
esac
claude mcp list | grep gbrain  # verify: should show "✓ Connected"

On a local PGLite brain, claude mcp list can show Failed to connect while an open Claude Code session's gbrain holds the database's single-writer lock. If mcp__gbrain__* tools work in that session, the registration is fine.

Both paths

If claude is not on PATH: emit "MCP registration skipped — this skill is Claude-Code-targeted; register gbrain serve (or your remote MCP URL) in your agent's MCP config manually." Continue to step 6.

Heads-up for the user: an already-open Claude Code session will not pick up the new MCP tools until restart. Tell them: "Restart any open Claude Code sessions to see mcp__gbrain__* tools — they're loaded at session start, not mid-session."

Step 6: Per-remote policy (gated repo-import)

If we're in a git repo with an origin remote, check the policy:

current_tier=$(~/.claude/skills/gstack/bin/gstack-gbrain-repo-policy get)

Branches:

• read-write → import this repo: gbrain import "$(pwd)" --no-embed then gbrain embed --stale & in the background.
• read-only → skip import entirely (this tier is enforced by the future auto-import hook + by gbrain resolver injection, not here).
• deny → do nothing.
• unset → AskUserQuestion: "How should <normalized-remote> interact with gbrain?"
• read-write — agent can search AND write new pages from this repo
• read-only — agent can search but never write
• deny — no interaction at all
• skip-for-now — don't persist, ask next time

On answer (other than skip-for-now): ``bash ~/.claude/skills/gstack/bin/gstack-gbrain-repo-policy set "$REMOTE" "$TIER" ` Then import iff read-write`.

If outside a git repo OR no origin remote: skip this step with a note.

For /setup-gbrain --repo invocations, execute ONLY Step 6 and exit.

Step 7: Offer artifacts sync + wire it into gbrain

Behavioral transcript ingest is a separate step (7.5).

Separate AskUserQuestion: "Also sync your gstack artifacts (CEO plans, designs, reports, retros) to a private git repo that gbrain can index across machines?"

Options:

• Yes, full sync (everything allowlisted)
• Yes, artifacts-only (plans, designs, retros — skip behavioral data)
• No thanks

If yes, run the artifacts-init helper. It asks the user to pick a git host (GitHub via gh, GitLab via glab, or paste a URL manually), creates gstack-artifacts-$USER (private), and writes the canonical HTTPS URL to ~/.gstack-artifacts-remote.txt. Pass --url-form-supported from Step 4c's verify output (Path 4) or false (Paths 1/2/3 — local mode doesn't probe):

URL_FORM=${URL_FORM_SUPPORTED:-false}
~/.claude/skills/gstack/bin/gstack-artifacts-init --url-form-supported "$URL_FORM"
~/.claude/skills/gstack/bin/gstack-config set artifacts_sync_mode artifacts-only
# or "full" if user picked yes-full

gstack-artifacts-init always prints a "Send this to your brain admin" block at the end with the exact gbrain sources add command. The skill never auto-executes server-side gbrain commands; even if the user IS the brain admin, copy-pasting the printed command is the consistent UX.

Path 4 (Remote MCP) — done after artifacts-init

In remote mode, the local gstack-gbrain-source-wireup helper does NOT run (it shells out to a local gbrain CLI which Path 4 doesn't install). The brain admin runs the printed command on the brain host instead. Skip to Step 7.5.

Paths 1, 2a, 2b, 3 (Local stdio) — wire up the federated source

Then wire the artifacts repo into gbrain so its content is searchable from any gbrain client. The helper creates a git worktree of ~/.gstack/, registers it as a federated source via gbrain sources add --path --federated, and runs an initial gbrain sync. Local-stdio paths only.

Capture the database URL out of ~/.gbrain/config.json first and pass it explicitly so the wireup is robust against any other process rewriting ~/.gbrain/config.json mid-sync (e.g., concurrent gbrain init runs elsewhere on the machine):

GBRAIN_URL=$(python3 -c "
import json, os, sys
try:
    c = json.load(open(os.path.expanduser('~/.gbrain/config.json')))
    print(c.get('database_url', ''))
except Exception:
    pass
")
~/.claude/skills/gstack/bin/gstack-gbrain-source-wireup --strict \
  ${GBRAIN_URL:+--database-url "$GBRAIN_URL"}

--strict exits non-zero on missing prereqs (gbrain not installed, < 0.18.0, or no ~/.gstack/.git yet) so the user sees the failure rather than silently ending up with an unwired brain. On non-zero exit, surface the helper's output and STOP per skill rules — search-across-machines won't work until the prereq is fixed.

Step 7.5: Transcript ingest consent

SKIP entirely on Path 4 (Remote MCP). Transcript ingest shells out to the local gbrain CLI which Path 4 doesn't install. Remote-mode users rely on the brain server's own ingest cadence — if your brain admin wants this machine's transcripts indexed, they pull from your gstack-artifacts-$USER repo (set up in Step 7) on whatever schedule they prefer. Do not store a transcript mode for the user here; transcripts stay skipped until they choose (/sync-gbrain asks). Continue to Step 8.

For Paths 1, 2a, 2b, 3, run the ingest gate:

STOP. Before running the Step 7.5 transcript & memory ingest gate on Paths 1, 2a, 2b, or 3 (Path 4 skips this section entirely — see the skeleton's skip note), Read ~/.claude/skills/gstack/setup-gbrain/sections/transcript-gate.md and execute it in full. Do not work from memory — that section is the source of truth for this step.

Step 8: Persist ## GBrain Configuration in CLAUDE.md

CLAUDE.md is the audit trail: after a successful setup, persist the configuration block. The exact block formats (remote-http vs local-stdio) live in the claude-md-persist section. The search-guidance block is written only by /sync-gbrain (Step 10 offers it).

STOP. Before persisting the Step 8 ## GBrain Configuration block to CLAUDE.md, Read ~/.claude/skills/gstack/setup-gbrain/sections/claude-md-persist.md and execute it in full. Do not work from memory — that section is the source of truth for this step.

Step 9: Smoke test

Path 4 (Remote MCP)

The mcp__gbrain__* tools aren't visible mid-session — they're loaded at Claude Code session start. So the live smoke test in this same skill run is informational: print the curl-equivalent the user can run after restarting Claude Code. The verify round-trip in Step 4c already proved the server is reachable + authed + on a compatible MCP version, so we don't re-test that.

Print to stdout:

After restarting Claude Code, the `mcp__gbrain__*` tools become callable.
Smoke test: ask the agent to run `mcp__gbrain__search` with any query
("test page" works). You should see a JSON list of pages.

To verify from the shell right now (without waiting for restart):
  curl -s -X POST -H 'Content-Type: application/json' \
       -H 'Accept: application/json, text/event-stream' \
       -H 'Authorization: Bearer <YOUR_TOKEN>' \
       -d '{"jsonrpc":"2.0","id":1,"method":"tools/list","params":{}}' \
       <YOUR_MCP_URL>

Do NOT print the actual token in the curl command — leave the placeholder <YOUR_TOKEN> so the snippet is safe to copy into chat / share.

Paths 1, 2a, 2b, 3 (Local stdio)

SLUG="setup-gbrain-smoke-test-$(date +%s)"
SMOKE_PAGE=$(mktemp "${TMPDIR:-/tmp}/gstack-gbrain-smoke.XXXXXX")
echo "Set up on $(date). Smoke test for /setup-gbrain." > "$SMOKE_PAGE"
gbrain put "$SLUG" < "$SMOKE_PAGE"; PUT_RC=$?
rm -f "$SMOKE_PAGE"
[ "$PUT_RC" -eq 0 ] && gbrain search "smoke test" | grep -i "$SLUG"

Confirms the round trip. The page goes in from a temp file, not a pipe: on Windows, gbrain failed to read a piped page. On failure, surface gbrain doctor --json output and STOP with a NEEDS_CONTEXT escalation.

Step 9.5: Brain trust policy

The brain trust policy controls whether gstack auto-pushes ~/.gstack/ artifacts and writes calibration takes back to this brain. It's per- endpoint: a user with both a local PGLite (personal) and a team remote MCP (shared) gets both policies tracked separately.

Detect the active endpoint hash + current policy:

_HASH=$(~/.claude/skills/gstack/bin/gstack-config endpoint-hash 2>/dev/null)
_POLICY=$(~/.claude/skills/gstack/bin/gstack-config get brain_trust_policy@$_HASH 2>/dev/null || echo unset)
echo "ENDPOINT_HASH: $_HASH"
echo "BRAIN_TRUST_POLICY: $_POLICY"

Branch on transport + current policy:

**If _POLICY is personal or shared:** policy already set. Print "Trust policy for this endpoint: $_POLICY" and skip to Step 10.

**If _POLICY is unset AND _HASH == "local":** auto-set personal (local engines are inherently single-tenant). No AskUserQuestion.

~/.claude/skills/gstack/bin/gstack-config set brain_trust_policy@$_HASH personal
echo "Trust policy auto-set to 'personal' for local PGLite (single-tenant by construction)."

**If _POLICY is unset AND _HASH != "local" (remote MCP):** ask the trust policy question via AskUserQuestion:

The brain at this MCP endpoint — is it your personal brain or a shared/team brain? Personal: gstack auto-pushes ~/.gstack/ artifacts (CEO plans, design docs, retros, learnings) and writes calibration takes back as you make decisions. Your brain gets smarter every session. Pick this if you alone set up this brain. Shared/team: read-only by default. gstack reads context but prompts before any write. Safer for brains where your individual takes shouldn't pollute the shared corpus.

Options:

• A) Personal (recommended for self-hosted remote brains)
• B) Shared/team

After answer, persist:

~/.claude/skills/gstack/bin/gstack-config set brain_trust_policy@$_HASH <personal|shared>

If personal was selected AND artifacts_sync_mode is still off, also default it to full (personal brains auto-push):

_CURRENT_SYNC=$(~/.claude/skills/gstack/bin/gstack-config get artifacts_sync_mode 2>/dev/null || echo off)
if [ "$_CURRENT_SYNC" = "off" ]; then
  ~/.claude/skills/gstack/bin/gstack-config set artifacts_sync_mode full
  echo "artifacts_sync_mode auto-set to 'full' (personal brain default)."
fi

Backwards compat: existing users whose artifacts_sync_mode_prompted is already true keep their answer; this gate only fires for new endpoints or first-time-after-upgrade users.

Step 10: GREEN/YELLOW/RED verdict block (idempotent doctor output)

After Steps 1-9 complete, summarize. Re-running /setup-gbrain on a configured machine is a first-class doctor path: every step detects existing state, repairs only what's missing, and reports here.

GSTACK_STATE_ROOT=$(~/.claude/skills/gstack/bin/gstack-paths --get GSTACK_STATE_ROOT); : "${GSTACK_STATE_ROOT:?gstack-paths failed; reinstall with ./setup or /gstack-upgrade}"
~/.claude/skills/gstack/bin/gstack-gbrain-detect 2>/dev/null || true
~/.claude/skills/gstack/bin/gstack-config has transcript_ingest_mode && echo "transcript_ingest_mode: $(~/.claude/skills/gstack/bin/gstack-config get transcript_ingest_mode)" || echo "transcript_ingest_mode: not set"
~/.claude/skills/gstack/bin/gstack-config get artifacts_sync_mode 2>/dev/null || echo "off"
[ -f "$GSTACK_STATE_ROOT"/.gbrain-sync-state.json ] && cat "$GSTACK_STATE_ROOT"/.gbrain-sync-state.json || echo "{}"

Read gbrain_mcp_mode from the detect output and pick the right verdict template. Each row is [OK]/[FIX]/[WARN]/[ERR].

Path 4 (Remote MCP)

gbrain status: GREEN  (mode: remote-http)

  MCP ............. OK   {SERVER_NAME} v{SERVER_VERSION} at {MCP_URL}
  Auth ............ OK   bearer accepted (verified via /tools/list)
  Engine .......... N/A  remote mode
  Doctor .......... N/A  remote mode (brain admin runs `gbrain doctor`)
  Repo policy ..... OK   {read-write|read-only|deny}
  Artifacts repo .. OK   {gstack_artifacts_remote URL}
  Artifacts sync .. OK   {artifacts_sync_mode}
  Transcripts ..... OK   {recent|all}: route to artifacts repo → remote brain | INFO {off|not set}: skipped
  Code search ..... {OK local-pglite (~/.gbrain/pglite) | N/A declined at Step 4d}
  CLAUDE.md ....... OK
  Smoke test ...... INFO printed for post-restart manual verification

Restart Claude Code to pick up the `mcp__gbrain__*` tools.
Re-run `/setup-gbrain` any time the bearer rotates or the URL moves.

The Code search row reflects the choice at Step 4d:

• If user picked A (Yes): OK local-pglite and gbrain_local_status == "ok" going forward.
• If user picked B (No): N/A declined at Step 4d — gstack-config set local_code_index_offered true to silence future migration notices.

The Transcripts row: in remote-http mode, gstack-memory-ingest persists staged transcripts to ~/.gstack/transcripts/run-<pid>-<ts>/ and gstack-brain-sync pushes them to the artifacts repo; the brain admin's pull job indexes them into the remote brain. Local PGLite (when present) stays code-only.

Paths 1, 2a, 2b, 3 (Local stdio)

gbrain status: GREEN  (mode: local-stdio)

  CLI ............. OK   <gbrain version>
  Engine .......... OK   <pglite|supabase> at <path>
  doctor .......... OK
  MCP ............. OK   registered (user scope)
  Repo policy ..... OK   <read-write|read-only|deny>
  Code import ..... OK   <last_imported_head>
  Artifacts sync .. OK   <artifacts_sync_mode> to <remote>
  Transcripts ..... OK   <recent|all>: <N> sessions, last ingest <when> | INFO <off|not set>: skipped
  CLAUDE.md ....... OK
  Smoke test ...... OK   put → search round-trip

Run `/setup-gbrain` again any time gbrain feels off; it's safe and idempotent.

A not set transcript mode is not a failure: transcripts stay skipped until the user chooses, and /sync-gbrain asks.

If any row is YELLOW or RED, the verdict line says so and the failing rows surface a one-line "next action" (e.g., Engine .......... ERR PGLite corrupt — re-import from a clone of your brain remote with \gbrain import\`). There is no automatic restore: with brain-sync enabled, the brain remote holds curated artifacts as markdown + git, recoverable via gbrain import` from a clone.

Next: /sync-gbrain

This skill does not write the ## GBrain Search Guidance block in CLAUDE.md; /sync-gbrain writes it once this repo's code index answers a read. Unless the verdict is RED, AskUserQuestion: "Run /sync-gbrain now to index this repo and add the search guidance to CLAUDE.md?" A) Run it now (read and follow the sync-gbrain skill) B) Later. If B, or with SESSION_KIND: spawned or headless, end by naming /sync-gbrain as the next step.

/setup-gbrain --cleanup-orphans

Re-collect a PAT (show the Path 2a PAT scope disclosure — it lives in the brain-init section; read that section if it isn't already loaded), then collect it with the secret-read helper and list the user's Supabase projects. The PAT is read from the user's paste into the environment; never type it into a command:

# We don't rely on a stored PAT.
. ~/.claude/skills/gstack/bin/gstack-gbrain-lib.sh
read_secret_to_env SUPABASE_ACCESS_TOKEN "Paste PAT: " || exit 1
projects=$(curl -s -H "Authorization: Bearer $SUPABASE_ACCESS_TOKEN" \
  https://api.supabase.com/v1/projects)

Parse the response, identify any project named starting with gbrain whose ref doesn't match the user's active ~/.gbrain/config.json pooler URL. For each orphan, AskUserQuestion per project: "Delete orphan project <ref> (<name>, created <created_at>)?" — NEVER batch; per-project confirm is a one-way door.

On confirmed delete:

curl -s -X DELETE -H "Authorization: Bearer $SUPABASE_ACCESS_TOKEN" \
  https://api.supabase.com/v1/projects/$REF

Never delete the active brain without a second explicit confirmation.

At end: unset SUPABASE_ACCESS_TOKEN. Revocation reminder.

Telemetry

The preamble's Telemetry block logs skill success/failure at exit. When emitting the event, add these enumerated categorical values to the telemetry payload (SAFE — no free-form secrets, never the URL or PAT):

• scenario: supabase-existing | supabase-auto-provision | supabase-manual | pglite-local | switch-to-supabase | switch-to-pglite | repo-flip-only | cleanup-orphans | resume-provision
• install_performed: yes | no (existing checkout reused) | skipped (pre-existing)
• mcp_registered: yes | no | claude-missing
• trust_tier_set: read-write | read-only | deny | skip-for-now | n/a (outside git repo)

Never pass SUPABASE_ACCESS_TOKEN, DB_PASS, GBRAIN_POOLER_URL, GBRAIN_DATABASE_URL, or any postgresql:// substring to the telemetry invocation.

Important Rules

• One rule for every secret. PAT, DB_PASS, pooler URL: env-var only, never argv, never logged, never persisted to disk by us. The only file that holds the pooler URL long-term is ~/.gbrain/config.json, written by gbrain's own init at mode 0600 — that's gbrain's discipline, not ours.
• STOP points are hard. Gbrain doctor not healthy, installer PATH shadow, migrate timeout, smoke test failure — each is a STOP. Do not paper over.
• Concurrent-run lock. At skill start, create the parent before acquiring the lock atomically. Keep mkdir's error output; missing parents and filesystem failures are not evidence of a competing run:

bash GSTACK_STATE_ROOT=$(~/.claude/skills/gstack/bin/gstack-paths --get GSTACK_STATE_ROOT); : "${GSTACK_STATE_ROOT:?gstack-paths failed; reinstall with ./setup or /gstack-upgrade}" if ! mkdir -p "$GSTACK_STATE_ROOT"; then echo "ERROR: Cannot create setup-gbrain lock parent $GSTACK_STATE_ROOT." >&2 exit 1 fi if ! mkdir "$GSTACK_STATE_ROOT"/.setup-gbrain.lock.d; then if [ -d "$GSTACK_STATE_ROOT"/.setup-gbrain.lock.d ]; then echo "Another /setup-gbrain instance is running. Wait for it, or remove $GSTACK_STATE_ROOT/.setup-gbrain.lock.d only if you are sure it is stale." >&2 else echo "ERROR: Cannot acquire setup-gbrain lock." >&2 fi exit 1 fi

Release the acquired lock on normal exit AND in the SIGINT trap.

• CLAUDE.md is the audit trail. Always update it in Step 8 after a successful setup.